BLHVW - SULFLO 2

  • MSDS: BLHVW
  • Manufacturer: SULFLO INC
  • Product Name: SULFLO 2
  • National Stock Number: 9150-00N020345
Product Identification

Product ID:SULFLO 2
MSDS Date:06/18/1991
FSC:9150
NIIN:00N020345
MSDS Number: BLHVW

Responsible Party
SULFLO INC
1158 ERIE AVE
N. TONAWANDA, NY 14120
US

Emergency Phone: 716-695-3585

Info Phone: 716-695-3585

Preparer: DENNIS KROL

Cage: 1V074

Contractor
SULFLO INC
285 NORTH TONAWANDA, NY 14120-3507 US

Telephone: 716-695-3585

Cage: 1V074

Ingredients

SULFUR

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: 2.5%


MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 95.5%

OSHA PEL 5 MG/M3 (OIL MIST)


LITHIUM 12 HYDROXYSTEARATE

CAS: 7620-77-1

Fraction By Weight: 1.0%


MICROCRYSTALLINE WAX

CAS: 63231-60-7

Fraction By Weight: 1.0%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IS A MILD TRANSIENT IRRITATION TO SKIN
AND EYES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:DO NOT INDUCE VOMITING. GET MD ATTENTION AT ONCE.
SKIN:FLUSH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. WASH
THOROUGHLY BEFORE REUSE. DESTROY CONTAMINATED SHOES. EYES: FLUSH
WITH SOAP A ND WATER FOR AT LEAST 15 MINUTES. GET MD ATTENTION.
INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (O2/ARTIFICIAL
RESPIRATION). GET MD.

Fire Fighting

Flash Point Method:COC
Flash Point:350F,177C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM,
EARTH OR SAND.
Fire Fighting Procedures:WATER MAY CAUSE FROTHING. USE MEDIA SUITABLE
FOR SURROUNDING FIRE .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:ABSORB WITH SAND OR INERT MATERIAL. SWEEP OR
SCOOP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING. DO NOT
GET IN EYES, OR ON CLOTHING. KEEP CONTAINER CLOSED WHEN NOT IN USE.
KEEP AWAY FROM SPARKS AND OPEN FLAMES.
Other Precautions:DO NOT BREATH DUST, VAPOR, MIST OR GAS.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:USE WITH ADEQUATE VENTILATION.
Protective Gloves:POLYVINYL CHLORIDE/BUTYL RUBBER (SUPDAT)
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PROT GLOVES:OR POLYETHYLENE GLOVES.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:700F,371C
Spec Gravity:0.89 @ 16C
Solubility in Water:NIL
Appearance and Odor:YELLOW SEMI-FLUID, BLAND ODOR.
Percent Volatiles by Volume:0%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:IGNITION SOURCES, OPEN FLAME.
Hazardous Decomposition Products:CO AND CO2 IF INCOMPLETE COMBUSTION.

Disposal

Waste Disposal Methods:INCINERATE OR APPROVED LAND FILL. DISPOSAL MUST
BE IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.